EN Weltkarte Created with Sketch.

Contact

Telefone / FAX

Tel.: (+49) 02207 9698-0
Fax.: (+49) 02207 4750

Postal address

Weyer GmbH
Herrenhöhe 4
D-51515 Kürten-Herweg

Route description

Service / technique / sale

Contact persons

Product Overview

Highlights

During the first hours and days of life, new born and premature babies primarily need warmth, comfort and closest possible contact to their parents. The VARIOTHERM infant care system has been developed for these very special conditions and offers unimpeded access for diagnostic and therapeutic measures as well as care treatments.

The VARIOTHERM product line is modular and can be adapted to different situations,, e.g. examination, resuscitation or intensive care. With different types of acrylic wall assemblies and numerous accessories of choice the device can be upgraded to a fully functional care unit.

A modular system, suitable for all requirements:

VARIOTHERM C

Infant care system with CERAMOTHERM
radiant warmer, static height or
height-adjustable

VARIOTHERM KCE

Infant care system with CERAMOTHERM
radiant warmer and under-pad heating with
soft-gel pad, static height or height-adjustable


Available acrylic wall assemblies:

Wall assembly 170 mm or 250 mm high, three sides can be folded down, always with two additional safety side walls

For the VARIOTHERM infant care system with 250 mm wall assembly, a one-piece or two-piece canopy is available


Sensible gentle warming and more

Gentle warming

Long-wave infrared radiation is not visible and has a gentle effect on the epidermis, the subjacent dermis and the bloodstream. 

The integrated high-performance reflector spreads the infrared radiation efficiently and evenly all over the patient deck.

The intensity of the infrared radiation is precisely adjustable in mW/cm2; alternatively in %. A pre-set starting value can be chosen in the menu.

The radiant warmer can optionally be upgraded with patient temperature control.

4 integrated timers (Apgar-timer, countdown-timer, CPR-timer and stopwatch) give indication of each situation and facilitate close recording of the patients' development.

The colour display adjusts its brightness to existing light conditions. This ensures good readability, day or night.

Homogeneous illumination

For treatment of the little patients the best light is just good enough. Infants, in particular new born babies, are stressed when they are dazzled by a sudden glaring spotlight.

Therefore the large-area lamps switche the light on and off gently. The babies remain calm and feel cosy.

The light's colour temperature of 4000 Kelvin guarantees an excellent appearance and is suitable for examinations and minor operations. 

The light intensity can be adjusted in 5 steps ensuring optimum light, day or night. A pre-set starting value can be chosen in the menu.


Remarkable functions

The patient deck can be tilted up and down by one hand. The EPR-function (Each Position Radiation) ensures optimum warming comfort with the patient remaining below the radiant warmer. The baby is never exposed to temperature fluctuations. 

Moreover, the distance to connected monitors or devices remains the same in any position. Therefore an unintended detachment of pipes and hoses is prevented.

Swivelling radiant warmer

No hypothermia or cold stress when the radiator is swivelled to one side. 

The CCM-function (Clever Curve Movement) focuses the radiation on the patient, even in swivelled position. This way the radiation is always where it's needed without heat exposure for attending nursing staff or parents.

Actively heated gel pad

The VARIOTHERM infant care systems order no. WY3042 and WY3043 are equipped with an actively heated gel pad. The soft gel pad is optimised for small patients and helps prevent pressure sore even during long-term care.

The combination of long-wave infrared radiation and actively heated gel pad allows to reduce the radiation intensity noticeably. Transepidermal water losses are reduced to the same extent and the patient remains calm and unstressed.

The stable thermally neutral environment provides best conditions for an open care.


Sophisticated patient deck, functional wall assembly

The walls of the VARIOTHERM infant care system can be folded up and down by one hand. Cables and hoses can be passed and fixed through openings or grommets easily.

The concave shaped sides of the patient deck and the safety side walls prevent the patient from falling out of the bed when the walls are folded-down. For an unimpeded access to the patient, the safety walls can be retracted into the patient deck completely.

Gentle soft-lift height adjustment

Depending on the device model the height of the patient deck can be adjusted smoothly and is operated with foot pedals. The smooth movement does not startle the baby, maintaining comfort.

Easy change of location

Sturdy smooth double castors provide a stable position of the VARIOTHERM infant care system and allow easy movement. One castor is fitted with a steering lock that guarantees a perfect directional stability and allows maneuvering around corners and furniture.

Four bumpers protect the VARIOTHERM infant care system, surrounding furniture and walls from potential damage.

Built in convenient storage

During care it is important to have necessary items available at all times. The drawers of the infant care system are accessible from all sides and in every situation.

Produktdetails

VARIOTHERM C

with radiant warmer, static height or height-adjustable

Electrical parameters

  VARIOTHERM C
with radiant warmer, static height WY3040
VARIOTHERM C
with radiant warmer, height adjustable WY3041
Under-pad heating
Soft-lift pillar 120 W
Radiant warmer CERAMOTHERM 3200 900 W 900 W
Take-off sockets for accessories 4 4
Max. power input 2300 W 2300 W
Voltage 230 V / 50 – 60 Hz 230 V / 50 – 60 Hz

Operating parameters

  VARIOTHERM C
with radiant warmer, static height WY3040
VARIOTHERM C
with radiant warmer, height-adjustable WY3041
Head-up and head-down position each adjustable to 12° 12°
Pad PU foam PU foam
Selection range of under-pad heating
Illumination 2 x 1700 lm, dimmable 2 x 1700 lm, dimmable
Colour temperature of the light 4000 K 4000 K
Heating element of radiant warmer / wavelength 2 ceramic / 1.5 - 6 µm 2 ceramic / 1.5 - 6 µm
Selection of radiation intensity 2 – 22 mW/cm² 2 – 22 mW/cm²
Function "automatic intensity reduction" Yes Yes
Display of selected value, actual value and residual heat Yes Yes

Dimensions and weight

  VARIOTHERM C
with radiant warmer, static height WY3040
VARIOTHERM C
with radiant warmer, height-adjustable WY3041
Weight 70 kg 76 kg
Dimension of patient deck 480 x 740 mm 480 x 740 mm
Height of patent deck 960 mm 850 – 1150 mm
Diameter of tube assembly 40 mm 40 mm

Classification and standards

  VARIOTHERM C
with radiant warmer, static height WY3040
VARIOTHERM C
with radiant warmer, height-adjustable WY3041
Classification according to directive 93/42/EEC IIa IIa

VARIOTHERM KCE

with radiant warmer and under-pad heating, static height or height-adjustable

Electrical parameters

  VARIOTHERM KCE
with radiant warmer, under-pad heating, static height WY3042
VARIOTHERM KCE
with radiant warmer, under-pad heating, height-adjustable WY3043
Under-pad heating 180 W 180 W
Soft-lift pillar 120 W
Radiant warmer CERAMOTHERM 3200 900 W 900 W
Take-off sockets for accessories 3 3
Max. power input 2300 W 2300 W
Voltage 230 V / 50 – 60 Hz 230 V / 50 – 60 Hz

Operating parameters

  VARIOTHERM KCE
with radiant warmer, under-pad heating, static height WY3042
VARIOTHERM KCE
with radiant warmer, under-pad heating, height-adjustable WY3043
Head-up and head-down position each adjustable to 12° 12°
Pad Silicone gel Silicone gel
Selection range of under-pad heating Standard 35.0-37.0 °C,
Extended 30.0-38.5 °C
Standard 35.0-37.0 °C,
Extended 30.0-38.5 °C
Illumination 2 x 1700 lm, dimmable 2 x 1700 lm, dimmable
Colour temperature of the light 4000 K 4000 K
Heating element of radiant warmer / wavelength 2 ceramic / 1.5 - 6 µm 2 ceramic / 1.5 - 6 µm
Selection of radiation intensity 2 – 22 mW/cm² 2 – 22 mW/cm²
Function "automatic intensity reduction" Yes Yes
Display of selected value, actual value and residual heat Yes Yes

Dimensions and weight

  VARIOTHERM KCE
with radiant warmer, under-pad heating, static height WY3042
VARIOTHERM KCE
with radiant warmer, under-pad heating, height-adjustable WY3043
Weight 77 kg 83 kg
Dimension of patient deck 480 x 740 mm 480 x 740 mm
Height of patent deck 960 mm 850 – 1150 mm
Diameter of tube assembly 40 mm 40 mm

Classification and standards

  VARIOTHERM KCE
with radiant warmer, under-pad heating, static height WY3042
VARIOTHERM KCE
with radiant warmer, under-pad heating, height-adjustable WY3043
Classification according to directive 93/42/EEC IIb IIb
     

Zubehör

VARIOTHERM basic configuration

All VARIOTHERM devices are equipped with:
4 smooth double castors, 3 with total lock, 1 with steering lock, patient deck 480 x 760 mm, head-up and head-down position adjustable to ± 12°, 3-4 take-off sockets 230 V for additional devices, swivelling radiant warmer with CCM-function, tube assembly Ø 40 mm.

 

Explanation:  ● accessory,    ▲ essential for use

Configuration of base device

  Order No. WY3040 WY3041 WY3042 WY3043
Patient deck without heating  
Yes
Yes
Under-pad heating with gel pad  
Yes
Yes
Soft-lift height-adjustment,
height of patient deck 850-1150 mm
 
Yes
Yes
Swivelling radiant warmer CERAMOTHERM® 3200  
Yes
Yes
Yes
Yes

Wall assembly (compulsory order of WY3021 or WY3022)

  Order No. WY3040 WY3041 WY3042 WY3043
Wall assembly 170 mm high, fold-down, 2 safety side walls WY3022
Wall assembly 250 mm high, fold-down, 2 safety side walls WY3021
Canopy one-piece for wall assembly 250 mm high (WY3021) WY3024
Canopy two-piece for wall assembly 250 mm high (WY3021) WY3025

Modular components

Because of its modular system, it is possible to create an individual, variable set-up of the VARIOTHERM infant care system, suitable for all requirements.

Following the use of compatible components complying with standard rail 25 x 10 (EN ISO 19054), not only the components mentioned here can be used. It is also possible to add already existing components as well as other manufacturers' devices, given that this would correspond to their intended use.

By using the power cord order no. WY1858 electrical equipment can be connected to the take-off sockets which are fixed at the VARIOTHERM infant care system.

It is possible to fix up to 4 shelves at the soft-lift pillar for storing necessary material.

Alternatively, arch-shaped drawers can be fixed below the shelves (max. 2 shelves with 2 drawers per device).

Order No.  
WY3035 Shelf fixed at the pillar, max. 4 shelves per device
WY3036 Drawer arcuately sliding out to both sides, fixed at shelf WY3035, max. 2 drawers per device
WY3032 Additional pair of foot pedals for height adjustment
WY1050 * Upgrade for patient-temperature measurement and control, integrated in radiant warmer
WY3037 * Compartment for drawer WY3036
WY3038 * Clip-on tray for side walls and rail 25 x 10 mm
WY3060 Shelf 590 x 320 mm, fixed at tube Ø 40 mm, foreside instrument rail 25 x 10 mm and rear provision for suspending the canopy
WY3065 High-grade steel rail 25 x 10 mm, straight, fixed at tube Ø 40 mm, EN ISO 19054
WY3066 Instrument rail 25 x 10 mm cranked, fixed at tube Ø 40 mm, EN ISO 19054
WY3067 Compact rail block 25 x 10 mm circular, fixed at tube Ø 40 mm, EN ISO 19054
WY2075 Infusion pole height-adjustable, with fixing clamp for tube Ø 40 mm
WY2069 Infusion pole threefold, with fixing clamp for tube Ø 40 mm
WY3075 Holder for respiration tubes and cables, fixed in the patient deck
WY1858 Power cord for electrical connection of equipment at take-off sockets, 1.5 m length

  * = available from 2018

Various further accessories available


Provision for compressed air operated equipment

According to the requirements of the care unit it is possible to connect compressed air operated equipment, e.g. suction, insufflation, ventilation and other devices, to central pipelines and pressure cylinders. Where more than one compressed air operated unit or oxygen supply shall be connected, standardized oxygen/ air distributors with three take-off sockets are available. Optionally available preference valves allow uninterrupted gas supply in case one of the pressure sources is not available.

Gas supply / Suction / Insufflation

Order No.  
WY2456 Holder for gas cylinder Ø 82-110 mm, max. 2 pieces per device
WY1608 Oxygen cylinder Ø 100 mm, EN1089, 3 l-200 bar, volume 600 l
WY1609 Air cylinder Ø 100 mm, EN1089, 3 l-200 bar, volume 600 l
WY1612 Oxygen pressure regulator G 3/4" a, plug-in coupling DIN 13260-2
WY1616 Air pressure regulator R G 5/8" i, plug-in coupling DIN 13260-2
WY1475 Oxygen preference valve, 2 inputs with NIST fitting, output with tube ISO 32 and NIST fitting, fixed at rail 25 x 10 mm
WY1476 Air preference valve, 2 inputs with NIST fitting, output with tube ISO 32 and NIST fitting, fixed at rail 25 x 10 mm
WY1411 Oxygen connection hose ISO 32, NIST fitting, 3 m length, pipeline plug DIN 13260
WY1438 Air connection hose ISO 32, NIST fitting, 3 m length, pipeline plug DIN 13260
WY1421 O2-Distributor, input NIST fitting, 3 take-off sockets DIN 13260, fixed at instrument rail 25 x 10 mm
WY1425 Air-Distributor, input NIST fitting, with 3 take-off sockets DIN 13260, fixed at instrument rail 25 x 10 mm
WY1620 Suction unit for compressed air operation with clamp for instrument rail 25 x 10 mm, NIST fitting, suction bottle 250 ml
WY1604 O2-Flow meter 0-15 l/m, NIST fitting, clamp for instrument rail 25 x 10 mm
WY1480
WY1481
Reanimat O2-Blend, gas supply for O2 and Air NIST fitting, Oxygen concentration adjustable 21 to 100 %, flow adjustable WY1480 = 0 to 6 l/min, or WY1481 = 0 to 15 l/min
WY1490 Suction unit for Reanimat O2-Blend Insufflation device

Do you have questions?

Tel.: +49 (0)2207 9698-0
E-Mail: info@weyermed.com

Brochure

Print this page