Product Overview

Highlights

The product line THERMOCARE is the result from decades of experience in warming therapy. Its development is focused on the patients' needs as well as the users' requirements and is a cost-conscious alternative when babies are requiring surveillance in the intermediate care unit. THERMOCARE warming beds create an ideal and thermally stable environment for the small patients, supporting their development.

A modular system, suitable for all requirements:

  • THERMOCARE K

    Warming bed with under-pad heating, static height or
    height-adjustable

  • THERMOCARE C

    Warming bed with radiant warmer, static height or
    height-adjustable

  • THERMOCARE KCE

    Warming bed with under-pad heating and radiant warmer, height-adjustable


  • Choose from:

    Wall assembly 170 mm or 250 mm high, Canopy, one-piece or two-piece


Focus on the patient

The bed allows optimum working conditions for the user. It can be tilted up and down by one hand, with the patient remaining centrally below the radiant warmer. The baby is not exposed to temperature fluctuations and the distance to connected monitors and devices remains the same.

All walls can be folded down by one hand allowing unimpeded access for users and parents.

Additional safety side walls prevent the infant from falling out of the bed if unattended. During care, these walls can be retracted into the bed.

Built in convenient storage

During care it is important to have necessary items available at all times. The drawers of the warming bed are accessible from all sides and in every situation.

Sensible, cosy radiant warming

Depending on the model, THERMOCARE warming beds are equipped with a radiant warmer. The long-wave infrared heat is not visible, very gentle and the patient feels cosy and warm.

Actively heated gel pad

Depending on the configuration, an actively heated gel pad supports the stabilisation of the body temperature. The large volume of accumulated heat in the gel pad provides perfect thermal balance to the baby and supports quick warming of hypothermic patients.

The soft and warm gel pad reminds the baby of the contact with the parents' skin and it becomes calm and content. A relaxed baby creates a positive atmosphere for parents and nursing staff.

In addition to this, the soft surface of the gel pad helps prevent pressure sore and provides comfort.

Radiant heat plus heated gel pad

The combination of long-wave infrared radiation and conductive heat from the gel pad creates ideal conditions for a thermally neutral environment in open care.

Soft-lift for gentle height adjustment

The bed's height can be adjusted smoothly with foot pedals. The baby does not startle by the movement and stays comfortable.

Adjustable lighting, always suitable

For the smallest patients the best light is just good enough. Infants, in particular new born babies are stressed when they are dazzled by a sudden glaring spotlight. Therefore the large-area lamps of the radiant warmer CERAMOTHERM switch the light on and off gently. The small patients remain calm and feel cosy.

According to the current situation, the light intensity can be adjusted in 5 steps ensuring optimum light, day or night. 

Integrated timers

The three timers integrated in the radiant warmer enable the THERMOCARE warming bed to give indication of either: 

● Apgar timer for postnatal care of new born babies

● Stop watch, helpful for many applications

● Countdown timer, always indispensable for timewise limited applications 

Changing the location - no problem

Sturdy smooth double castors provide a stable position of the THERMOCARE warming bed and allow easy movement. One castor is fitted with a steering lock which allows maneuvering around corners and furniture. Four bumpers protect the warming bed, surrounding furniture and walls from potential damage.

Integrated safety

THERMOCARE warming beds have been designed to be user-friendly and with the principle of integrated safety as top priority.

The concave form of the lying surface and the safety side walls prevent the baby from falling out of the bed.

When the gel pad is damaged, there is no leak of liquid.

The closed mashed steel safety guard of the radiant warmer prevents users and patients from touching the hot heating element.

Selected temperature and radiation intensity cannot be changed unintentionally.

High quality standard

THERMOCARE devices are developed and manufactured in Germany according to the current safety and quality standard.

The use of premium material and the solid workmanship guarantee a long life of the warming beds.

System synergies

WEYER devices build unique product lines with compatible components and elements. Amongst others these are:

Produktdetails

THERMOCARE K

with under-pad heating, static height or height adjustment

Electrical parameters

THERMOCARE K
static height,
with under-pad heating
THERMOCARE K
height-adjustable,
with under-pad heating
Under-pad heating 180 W 180 W
Soft-lift pillar 120 W
Take-off sockets for accessories 3 3
Max. power input 2300 W 2300 W
Voltage 230 V / 50 - 60 Hz 230 V / 50 - 60 Hz

Operating parameters

THERMOCARE K
static height,
with under-pad heating
THERMOCARE K
height-adjustable,
with under-pad heating
Head-up and head-down position each adjustable to 12°12°
Pad PU gel PU gel
Selection range of under-pad heating
Standard: 35 - 37 °C, Extended: 30 - 38.5 °C
Yes Yes
Display of selected and actual value and residual heat YesYes
Weight of device 66 kg 72 kg
Classification according to Directive 93/42/EEC II aII a

THERMOCARE C

with radiant warmer, static height or height adjustment

Electrical parameters

THERMOCARE C
static height,
with radiant warmer
THERMOCARE C
height-adjustable,
with radiant warmer
Soft-lift pillar120 W
Radiant warmer CERAMOTHERM690 W690 W
Take-off sockets for accessories33
Max. power input2300 W2300 W
Voltage230 V / 50-60 Hz230 V / 50-60 Hz

Operating parameters

THERMOCARE C
static height,
with radiant warmer
THERMOCARE C
height-adjustable,
with radiant warmer
Head-up and head-down position each adjustable to 12°12°
Pad PU foamPU foam
Illumination LED, 2 x 850 lm, dimmable LED, 2 x 850 lm, dimmable
Colour temperature of the light 4000 K4000 K
Heating element of radiant warmer / wavelength Ceramic / 1.5 – 6.8 μm Ceramic / 1.5 – 6.8 μm
Selection of radiation intensity 2 – 20 mW/cm²2 – 20 mW/cm²
Function "automatic intensity reduction" YesYes
Display of selected and actual value and residual heat YesYes
Weight of device 73 kg 79 kg
Classification according to directive 93/42/EEC II aII a

THERMOCARE KCE

with under-pad heating and radiant warmer, height adjustment

Electrical parameters

THERMOCARE KCE
height-adjustable, under-pad heating, radiant warmer
Under-pad heating180 W
Soft-lift pillar 120 W
Radiant warmer CERAMOTHERM 690 W
Take-off sockets for accessories3
Max. power input2300 W
Voltage230 V / 50-60 Hz

Operating parameters

THERMOCARE KCE
height-adjustable, under-pad heating, radiant warmer
Head-up and head-down position each adjustable to 12°
Pad PU gel
Selection range of under-pad heating
Standard: 35 - 37 °C, Extended: 30 - 38.5 °C
Yes
Illumination LED, 2 x 850 lm, dimmable
Colour temperature of the light 4000 K
Heating element of radiant warmer / wavelength Ceramic / 1.5 – 6.8 μm
Selection of radiation intensity 2 – 20 mW/cm²
Function "automatic intensity reduction" Yes
Display of selected and actual value and residual heat Yes
Weight of device 80 kg
Classification according to directive 93/42/EEC II b

Zubehör

All THERMOCARE devices are equipped with:

4 smooth double castors, 3 with total lock, 1 with steering lock, patient deck 480 x 760 mm with raised sides, Head-up and head-down position adjustable up to 12° each, 3 take-off sockets 230 V.

THERMOCARE K  with under-pad heating: Static height WY3001 or height adjustment WY3002

THERMOCARE C  with radiant warmer: Static height WY3003 or height adjustment WY3004

THERMOCARE KCE  with under-pad heating and radiant warmer: Height adjustment WY3006


Legend:  ●   accessory,   ▲ essential for use

Configuration of base device

WY3001WY3002WY3003WY3004WY3006
Under-pad heating with gel pad
Yes
Yes
Yes
Soft-lift height-adjustment,
bed height 850 - 1150 mm
Yes
Yes
Yes
Tube assembly for adapting a radiant warmer and further accessories
Yes
Yes
Yes
Radiant warmer CERAMOTHERM
Yes
Yes
Yes

Wall assembly (compulsory order of WY3021 or WY3022)

Order No.WY3001WY3002WY3003WY3004WY3006
Wall assembly 170 mm high,
fold-down, 2 safety side walls
WY3022
Wall assembly 250 mm high,
fold-down, 2 safety side walls
WY3021
Canopy one-piece for wall assembly 250 mm high (WY3021) WY3024
Canopy two-piece for wall assembly 250 mm high (WY3021) WY3025

Upgrade items / accessories

Order No.WY3001WY3002WY3003WY3004WY3006
Shelf fixed at the pillar,
max. 4 shelves per device
WY3035
Arch-shaped drawer sliding out to both sides, fixed at the shelf WY3035, max. 2 drawers per device WY3036
Additional pair of foot pedals for height adjustment WY3032
Support for adapting 2 tubes
27 mm
WY3051
Tube assembly Ø 27 mm, length 650 mm for adapting accessories WY3055
Shelf 590 x 320 mm, fixed at the tubes Ø 27 mm and Ø 40 mm, with instrument rail and fixture for the canopy WY3060
Shelf 240 x 300 mm, fixed at the tube assembly Ø 27 mm, with 2 instrument rails and fixture for the canopy WY3061
Instrument rail fixed at the tube assembly Ø 27 mm WY3064
Infusion holder, height-adjustable, fixed at the tube assembly
Ø 27 mm
WY2076
Four-poster for bed, plugged in WY3051 WY3070
Holder for respiration tubes, fixed in the corner of the bed WY3075

Do you have questions?

Tel.: +49 (0)2207 9698-0
E-Mail: info@weyermed.com

Print this page